Powerizer is the Natural Solution for
a Cleaner Car and Garage

Step 1: Use a squeeze bottle or bucket to dissolve two cleaning pods or one scoop with 16 oz. of warm water.
Step 2: For electrical devices, apply the Powerizer solution onto a microfiber cleaning cloth and wipe hard surfaces with the solution. For non-electrical devices, allow to soak-in the Powerizer solution to eliminate stubborn buildup.
Step 3: Scrub the tools with a cleaning brush when needed to remove debris, then rinse with plain water.

Step 1: Prep the area, sweep, or vacuum removing excess debris.
Step 2: Use a squeeze bottle or bucket to dissolve two cleaning pods or one scoop with 16 oz of warm water and pour onto the stain to saturate the area for at least 10 minutes.
Step 3: Scrub and lift the stain using a microfiber cloth.
Step 4: Once the stain is lifted, rinse the area with plain water. Use another microfiber cloth to absorb as much water as possible. Continue to apply more plain water until the cloth wrings out clear.

Step 1: Use a bucket to dissolve1 cleaning pod or one-fourth of a scoop with 32 oz. of warm water.
Step 2: Dampen a cleaning cloth with the solution and wipe over surfaces.
Step 3: Wipe over again with plain water then dry the surface.

Step 1: Pour Powerizer granules onto the tough oil or grease stain until completely covered. Apply water to the granules until paste forms and allow it to sit for about 15 minutes.
Step 2: Scrub the area with a scrub brush or scouring pad if needed.
Step 3: Rinse with plain water.